Manuals
Mix-Mill has been a trusted name in feed processing and mixing equipment since 1954, now proudly offered by ArrowCorp to support efficient ingredient processing across industries such as food processing, feed milling, and cereal production. Backed by decades of proven performance, Mix-Mill equipment is engineered for durability, efficiency, and consistent results, reflecting ArrowCorp’s commitment to reliable solutions and innovative design for modern production environments.
6″ Hi-Capacity Auger System
6" Hi-Capacity Auger System (NO LONGER MADE) SOME PARTS ONLY
HI_CAP_0_0.pdf 6inch_HiCap_Auger_System_0_0.pdf92001474
Sentry 3000 20hp 3ph 6" discharge Mix-Mill and Farmatic
SENTRY_3000_MANUAL_20HP_3PH_6_DSCHG_0_0.pdf92001517
Sentry 1000 Hammer Mill 20hp 3ph Mix-Mill and Farmatic
Sentry_1000_20HP_3PH_230_460V_MANUAL_0.pdf92001552
Sentry 1000 Hammer Mill 5-10hp 1ph Mix-Mill and Farmatic
Sentry_1000_5-10HP_1PH_MANUAL_0.pdf92001555
Sentry 1000 hammer Mill 5-10hp 3ph Mix-Mill and Farmatic
Sentry_1000_5-10HP_230V_3PH_MANUAL_0.pdf99960033-O White Mill
D-Mill Operation Instruction (NO LONGER MADE)
D-Mill_Operating_instructions_0.pdf99960081 FEED FACTORY
Construction Manual 20-40 Ton Feed Factory (SOME PARTS ARE AVAILABLE)
Feed_Factory_20-40_Ton_0.pdf99960090 8X8 FEED PUMP
2 Inch Feed Pump 8x8 (NO LONGER MADE)
99960155 WHITE
Model D-Mill Conversion from Solid State to Standard D-Mill Control Panel (NO LONGER MADE)
Model_D-Mill_Conversion_0.pdfCX GREEN MANUAL ON A GRAVITY AND GROUND LEVEL
CX MANUAL ON A GRAVITY AND GROUND LEVEL (PARTS ONLY)
CX_MANUAL_0_0.pdfCX GREEN MILL REPLACEMENT PARTS ONLY
CX MILL REPLACEMENT (SOME PARTS ONLY)
CX_REPLACEMENT_PARTS_0_0.pdfHammer Mills installation Manuals
Sentry Hammer Mill installation Manual 1000 to 5000
Sentry_Hammer_Mills_installation_Manuals_1000_to_5000_0.pdfModern Mill Series 5 RED
Modern Mill Series 5 Parts (SOME PARTS)
Modern_Mill_Series_5_parts_0.pdf Modern_Mill_Series_5_parts2_0.pdfModern Mill Series 50 RED
Modern Mill Series 50 Owners Manual (SOME PARTS)
Modern_Mill_Series_50_Owners_Manual_0.pdfThe Old C and CX Mills GREEN
The Old C and CX Mills (SOME PARTS ONLY)
The_Old_C_and_CX_0.pdf OLD_TO_NEW_NUMBERS_0_0.pdfDry Separation Specialist
Arrowcorp is a leader in the design and manufacture of grain, seed and milling equipment based in Canada and USA exporting equipment to over 70 countries around the world. Equipment Design Built, Over-Engineering, Perennial Parts Program, Custom Manufacturing, Maintenance Programs and more.